FUS S220 WavEdge Slump Mold
FUS C110 Square Foot Casting Mold
4 page Instructional Booklet
Weblink to download one eProject with Video

The WavEdge Mold Bundle enables glass fusers to create a platter that is 9” square x 2” high, with a square cookie style foot, in a three-step process (23 x 5 cm).
The first step is to cast a glass foot disk using the FUS C110 foot casting mold and 5.6 oz (160 g) of scrap-glass shards.
Then design and fuse a 9.25” (23.5 cm) square flat design. This could be a single glass layer with fused design elements on it or it could be a two layer, full-fused design, or simply cut a 9.25” (23.5 cm) square from a compelling piece of fusible art glass and let the design in the glass and the square cast foot on the bottom be the star.
The final step is to slump the design into the WavEdge Mold to shape the platter and attach the cast glass foot to the underside in a single firing.
Note: You can create a beautiful platter using this mold without adding the cast glass foot. Create your 9" square design then place it on the FUS S220 mold and follow the slump firing schedule. The center of the design will slump into the foot cavity in the mold to form a slump-drop foot.

 

Note: The fusing kiln chamber must be minimum 14" dia by 6" deep (36 x 15 cm).